Mounted on a portable and flexible tripod Kolb's ClayHeater Spectratek is using infrared-heating-elements.A digital temperature control makes sure that the desired temperature on the clay surface will be achieved without overheating the material.Due to infrared technology the clay will be heated as deep as 20 mm without heating up your studio.Technical data mobile vertical height: 155 cm horizontal height: 190 cm temperature control voltage: 380 V phase: 1 power: 4,000 W digital distance sensor Therminal Integrated Sensor System working surface: 1 m² 2,100 mm x 890 mm x 1,450 mm Loading clay becomes faster with Kolb's ClayHeater: Five minutes before you begin working on a model, simply place the ClayHeater in front of where you want to start loading the clay. When you start loading clay simply move it on to the next area. Due to digital temperature control no overheating will occur and no damage of the model is possible - no matter how long the ClayHeater is placed in front of the model. The clay surface will always have the right temperature, you will not have to stop loading to use a heat-gun, but can go on working on perfectly prepared clay.

Mounted on a portable and flexible tripod Kolb's ClayHeater Spectratek is using infrared-heating-elements.A digital temperature control makes sure that the desired temperature on the clay surface will be achieved without overheating the material.Due to infrared technology the clay will be heated as deep as 20 mm without heating up your studio.Technical data mobile vertical height: 400 cm horizontal height: 360 cm temperature control voltage: 380 V phase: 3 power: 8,000 W digital distance sensor aluminium casing Therminal Integrated Sensor System 2 swivelling heating elements 2 fixed heating elements working surface: 2 m² 2,100 mm x 1,740 mm x 1,450 mm incl. heat sensor and acoustic measuring of distance Loading clay becomes faster with Kolb's ClayHeater: Five minutes before you begin working on a model, simply place the ClayHeater in front of where you want to start loading the clay. When you start loading clay simply move it on to the next area. Due to digital temperature control no overheating will occur and no damage of the model is possible - no matter how long the ClayHeater is placed in front of the model. The clay surface will always have the right temperature, you will not have to stop loading to use a heat-gun, but can go on working on perfectly prepared clay.

Description The new and innovative Kolb Mobile Heater in Kolb Design special painting has a continuous laser function, as well as a pyrometer for an exact temperature surveillance of the clay surface. Due to infrared technology the clay will be heated thoroughly in order to ensure a ideal base for the new layer of clay to be applied.The special protection glass covering the infrared elements protects the lamps against clay flakes. Product Highlights Kolb Version CLF Continuous Laser Function Kolb special painting Protection glass Specific possibilities for positioning the cassettes Computer-controlled heating Pyrometer for exact temperature control Laser circle displays, where the temperature measuring is effected Electronic distance control Efficient air filter in the cassettes Technical data Temperature control: yes Voltage: 400 V Phase: 3 Power: 12 kW Digital: yes Distance control: yes Continuous Laser Function: yes 2 swivelling heating elements: yes Working surface: 2,000 x 1,100 mm Our studio equipment is not in stock, for a quotation please send us a request via the shopping cart or contact our staff directly at sales@kolb-technology.com.The delivery period is a guide, the actual delivery time can be found in our offer.(Datasheet available in register "Media")Mobile Radiator

Set consists of: 1 UF160Plus "Plasticine Oven"3 gratings with perforated plate supportData: volume: 161 lwidth (interior): 560 mmheight (interior): 720 mmdepth (interior): 400 mmwidth (exterior): 745 mmheight (exterior): 1104 mmdepth (exterior): 584 mmelectrical load (during heating): approx. 3, 200 W (at 230V)(Datasheet available in register "Media"Clayovens

Set consisting of: 1 UF260Plus "Plasticine Oven" 3 gratings with perforated plate support Data: volume: 256 l width (interior): 640 mm height (interior): 800 mm depth (interior): 500 mm width (exterior): 824 mm height (exterior): 1,183 mm depth (exterior): 684 mm electrical load (during heating): approx. 3,400 W (at 230 V) (Datasheet available in register "Media")ClayOvens

Set consisting of: 1 UF55Plus "Plasticine Oven" 1 subframe with castors for UF55Plus 2 gratings with perforated plate support Data: volume: 53 l width (interior): 400 mm  height (interior): 400 mm depth (interior): 330 mm width (exterior): 585 mm height (exterior): 784 mm depth (exterior): 514 mm electrical load (during heating): approx. 2,000 W (230 V; 50/60 Hz) (Datasheet available in register "Media")Clayovens

Set consisting of: 1 UF750Plus "Plasticine Oven" 7 gratings with perforated steel support Data: volume: 749 l width (interior): 1,040 mm height (interior): 1,200 mm depth (interior): 600 mm width (exterior): 1,124 mm height (exterior): 1,726 mm depth (exterior): 784 mm electrical load (during heating): approx. 7,000 W (400 V, 3 phases, 50 Hz) (Datasheet available in register "Media")Clayovens

Kolb Dynoc Preparation Tub makes the handling of the well-known painted foil much easier. made of stainless steel equipped with a temperature controlled heater, a circulating pump and a water filter in order to guarantee a long lasting water quality and consequently a long lasting quality of the prepared foil three built-in stainless steel rollers running on ball-bearings ensure that long lengths of foil can be easily handled when rolled on and off the unit electrical power plug is provided with a GFCI mobile use due to rollers Technical data length: 1,300 mm width: 700 mm height: 970 mm power: 230 V/ 2.1 kW temperature: approx. 40°C Our studio equipment is not in stock, for a quotation please send us a request via the shopping cart or contact our staff directly at sales@kolb-technology.com.The delivery period is a guide, the actual delivery time can be found in our offer.DynocTub

This hydraulic press produces your clay profiles for imitating e.g. rubber profiles, chrome profiles or protective strips. Almost every profile up to a diameter of 65 mm can be created by inserting a particular template into the locking head. heater is located behind the locking head adjustable temperature for high surface quality easy to open and extremely robust locking head variable feed speed A stainless-steel control panel holds information about exact temperature and pressure. For simple and convenient operation extrusion is activated by a foot switch. The foot switch is connected to the machine via a plug and can easily be unplugged if a replacement may be necessary. MouldingPress offers many storage possibilities for clay and templates with its fold away stainless steal worktop and the three built-in heavy duty drawers. The MouldingPress can be supplied either with vibration dampers or rollers. A set of blank templates is included. Technical data length: 1,460 mm (with folded worktop); 1,900 mm (with unfolded worktop) width: 600 mm height: 1,140 mm weight: approx. 130 kg power supply: 230 V / 50 Hz / 2.2 KW / 10 A Our studio equipment is not in stock, for a quotation please send us a request via the shopping cart or contact our staff directly at sales@kolb-technology.com.The delivery period is a guide, the actual delivery time can be found in our offer.(Datasheet available in register "Media")

Surface-Control-System Set consists of: - 2 modules (description below)/ Art. 105054717 - 1 mobile stand (lockable)/ Art. 105054727 - 1 hand control/ Art. 105054726 Module description: Illuminant: 4x40W Connection system: Harting plug system Reflector: High gloss Dimensions: 1560x860x65mm (LxWxD) Weight per module: approx. 52kg Equipment: Equipped with: 4x LED illuminant (included) LED-operating device: electronic, digital dimmable Optics: - 4x centrally arranged patented prismatic discs with plano-convex lens and black fields - 4x symmetrical reflectors, reflector chambers light-technically separated Front pane (shutter door): 6mm single pane safety glass according to EN12150 Cable entry: - Harting plug-in system - 3 m connection cable Technical data: Permissible ambient temperature: +5°C to +35°C Rated voltage: 220-240 V, 50/60 HzSurface-control-system